Glass Cutters
To cut large panes into smaller units, the first step is to scratch the glass-surface with special Glass Cutters. This creates tensions in the glass, allowing the second step: to bend the glass in a controlled manner, either by hand or likewise with a special tool, resulting in the actual break. Only when using a suitable tool it is guaranteed that the glass breaks precisely where desired.

Oil Glass Cutter
S1050
!

 

        • Oil Glass Cutter with Metall handle.

        • Oil Glass Cutter, original TOPLIFE quality at an especially good value for money, plastic handle, wide cutting head, stand-off distance to straight edge 2.5 mm.

Oil Glass Cutter
P1050
!

 

        • Oil Glass Cutter with plastic handle.

        • Oil Glass Cutter, original TOPLIFE quality at an especially good value for money, plastic handle, wide cutting head, stand-off distance to straight edge 2.5 mm.

Oil Glass Cutter
S1050D
!

 

        • Oil Glass Cutter with Metall handle.

        • Oil Glass Cutter, original TOPLIFE quality at an especially good value for money, small cutting head, stand-off distance to straight edge 2.5 mm.

MASTER Oil Glass Cutter
2000.M
!

 

        • Oil Glass Cutter with Toplife cutting wheel.

        • Oil Glass Cutter with Toplife cutting wheel with extremely long service life, ball-bearing, 360° freely rotating cutting head with trailing cutting wheel, exchangeable wheel holders with different cutting angles for all requirements, separate application of cutting fluid not necessary due to integrated tank, 2-valve technology for regulated, efficient oil flow, optimum control of cutting pressure with the ergonomic handle, with 155° wheel, for cutting shapes and for glass thicknesses of 6 to 12 mm, straight edge stand-off distance 6 mm.

MASTER Oil Glass Cutter
2000.P
!

 

        • Oil Glass Cutter with Toplife cutting wheel.

        • Oil Glass Cutter for perfect cutting of thick glass from 12 mm upwards, optimal application of cutting fluid, 2-valve technology, round cutting head, trailing, exchangeable Toplife cutting wheels, sturdy brass handle, cutting angle 158°, straight edge stand-off distance 6 mm.

MASTER Oil Glass Cutter
2000.S
!

 

        • Oil Glass Cutter with Toplife cutting wheel.

        • Oil Glass Cutter for perfect cutting of glass up to 6 mm thick, optimal application of cutting fluid, 2-valve technology, round cutting head, trailing, exchangeable Toplife cutting wheels, sturdy brass handle, cutting angle 145°, straight edge stand-off distance 6 mm.

Oil Glass Cutter - Nikken
1100160
!

 

        • Nikken NC-X01 for 2 - 6 mm glass.

        • Oil Glass Cutter Nikken NC-X01 for 2 - 6 mm glass, with plastic-grip, that serves simultaneously as tank. The forefinger of the hand rests on the grip-piece certainly and solidly. The wide, interchangeable guts-head is movable.

Oil Glass Cutter - Nikken
1100180
!

 

        • The Nikken NC-X02 for the cut of profile-glass.

        • Oil Glass Cutter Nikken NC-X02 is been suitable particularly for the cut of profile-glass, with plastic-grip, that serves simultaneously as tank. The forefinger of the hand rests on the grip-piece certainly and solidly. The interchangeable guts-head is movable.

Oil Glass Cutter - TOYO

6021195
!

 

        • Oil Glass Cutters, wide cutting head with carbide cutting wheel.

        • Oil Glass Cutter TOYO TC 17, wide cutting head with carbide cutting wheel, cutting angle 138°, straight edge stand-off distance 2.5 mm.

Oil Glass Cutter - TOYO
2013
!

 

        • Oil Glass Cutter with rotating grip.

        • Oil Glass Cutter TOYO TC 9 Oil Glass Cutte Model "Thomas Grip" with rotating grip for ergonomical handling, carbide cutting wheel.

Oil Glass Cutter - TOYO

1100150
!

 

        • Oil Glass Cutter-TOYO with wide movable head.

        • Oil Glass Cutter -TOYO with wide, interchangeable, movable head. Heavy brass-grip with integrated tank offers best hold with the cut.

Oil Glass Cutter
441.2
!

 

        • Oil Glass Cutter with wide cutting head.

        • Oil Glass Cutter with replaceable, wide cutting head, high-quality carbide cutting wheel, cutting angle 138°, stand-off distance to straight edge 2.5 mm, plastic handle with transparent oil tank, solid brass finger grip, traditional shape.

Thick Glass Cutter
2003.0
!

 

        • Thick Glass Cutter, Rotating handle for applying greater pressure.

        • Thick Glass Cutter, Rotating handle for applying greater pressure, with round cutting head  trailing, self-aligning wheel holder, cutting wheel in Toplife quality, cutting angle 158°, suitable for thick glass up to 25 mm, straight edge stand-off distance 6 mm.

Glass Cutter
1100140
!

 

        • Glass Cutter with carbide wheel ø 5 mm.

        • Glass Cutter Wooden handle, replaceable, tempered turret with carbide wheel ø 5 mm, especially selected carbide metal guarantees high wear-resistance, especially suitable for thick or hard glass, straight edge stand-off distance 2.5 mm.

Special Glass Cutter
2004.0
!

 

        • Special Glass Cutter with Toplife cutting wheel.

        • Special Glass Cutter, Toplife cutting wheel, plastic handle, can be placed underneath the cut to break the glass, extremely lightweight cutting head of special alloy, very smooth cutting, for glass 2 - 12 mm thick, cutting angle 135°, straight edge stand-off distance 2.5 mm.

Glass &Tile Cutter
410.0
!

 

        • SILBERSCHNITT- Carbide Glass and Tile Cutter.

        • SILBERSCHNITT - Carbide Glass and Tile Cutter, ergonomically shaped, plastic handle especially suitable to cut tiles requiring high cutting pressure, replaceable, tempered turret with one carbide wheel ø 5 mm, cutting angle 135°, straight edge stand-off distance 2.5 mm.

Glass Cutter
424.0
!

 

        • Glass Cutter with easy Grip, individually adjustable to hand size.

        • Glass Cutter with easy Grip, Grey plastic handle length, individually adjustable to hand size, carbide cutting wheel 120°, for opalescent or hard glass.

Oil Glass Cutter
444.0
!

 

        • Glass Cutter with easy Grip, individually adjustable to hand size.

        • Oil Glass Cutter - Easy Grip Carbide Oil Glass Cutter, blue plastic handle, with transparent tank to check oil supply, adjustable length of handle.

Strip Cutter
2005.0L
!

 

        • Strip Cutter for efficient cutting of equally wide glass strips.

        • Strip Cutter for efficient cutting of equally wide glass strips, adjustable strip width, for right or left handers.

Glass Circle Cutter
5210
!

 

        • Thick Glass Circle Cutter for circles 20 - 120 cm Ø.

        • Thick Glass Circle Cutter for circles 20 - 120 cm Ø, high level of operational safety due to heavy-duty construction, the ball handle above the wheel holder ensures the even transmission of the required cutting pressure for thick glass of 10 - 25 mm.

Glass Tube Cutter
5000117
!

 

        • Glass Tube Cutter, with carbide wheel.

        • Glass Tube Cutter, nickel-plated, with carbide wheel, for glass tubes of 4 - 30 mm diameters.

Circle Cutter
5110
!

 

        • Circle Cutter with 6 Steel Wheels.

        • Circle Cutter with 6 Steel Wheels,Wheels and turret can be easily exchanged.

Circle Cutter
5105
!

 

        • Circle Cutter with Ball-bearing Cutting Head.

        • Circle Cutter with Ball-bearing Cutting Head, Trailing carbide wheel in Toplife quality, improved break quality even for small radius, long service life, less cutting pressure, 135° cutting angle.

Circle Cutter
5300
!

 

        • Circle Cutter, for precise cutting round panes.

        • Circle Cutter, for precise cutting of large, round panes, turret with 6 steel, wheels  easy mounting onto cutting table or base plate (not included)

Circle Cutter
5330
!

 

        • Circle Cutter, Ball-bearing, for small circles up to 9 cm ø.

        • Circle Cutter,  Ball-bearing, for small circles up to 9 cm ø, for glass thicknesses up to 6 mm, replaceable steel holder with SILBERSCHNITT carbide micro wheel for small radius.

Cutting Fluid
W4104
!

 

        • Cutting Fluid ensures a soft and precise break.

        • Cutting Fluid ensures a soft and precise break, low surface tension, easy penetration into the cut, glass particles are bound, ensuring unhindered run of the wheel.

L-Squares
1204040
!

 

        • L-Squares, durable synthetic material.

        • Our L-Squares are constructed from a particularly tough and durable synthetic material, with which we are able to exceed the DIN Standards governing measurement error.

L-Squares
1205060
!

 

        • L-Squares, durable synthetic material.

        • These L-squares are manufactured in one piece from high-quality material. The integrated brace guarantees an especially high precision.

Radius Corner Template
078
!

 

        • Radius Corner Template with two suction pads for fixation.

        • Radius Corner Template with two suction pads for fixation, for radiuses of 10 to 70 mm, to be used with glass cutter 2000.M, 2000.P or 2000.S, stand-off distance 6 mm.

Radius Corner Template
1203010
!

 

        • Radius Corner Template, for radius of 10 to 70 mm.

        • Radius Corner Template, made of plastic, for radius of 10 to 70 mm, to be used with all standard glass cutters with 2.5 mm stand-off distance.

Template for Lateral Cut-Outs
0782
!

 

        • Template for Lateral Cut-Outs.

        • Template for Lateral Cut-Outs, Plastic, 2 suction pads for secure fixation, adjustable from min. 40 x 10 mm to max. 240 x 100 mm, corner radius 7 mm.

Speed Cutter
580.0
!

 

        • Speed Cutter for quick and easy cutting of large glass panes.

        • Speed Cutter for quick and easy cutting of large glass panes, with integrated oil supply and cutting head with Toplife cutting wheel.

Cutting Square
5000122
!

 

        • Cutting Square for Profile Glass.

        • Cutting Square for Profile Glass, Plastic, adjustable to all widths of profile glass from 22 to 50 cm, suitable glass cutters.

Cutting Frame
1203080
!

 

        • Cutting Frame for cutting a series off Glass.

        • Cutting Frame is an Practical device when cutting a series of equally dimensioned glass sheets.

Roll-up Workplace
536.0
!

 

        • Roll-up Workplace, the mobile roll-up workplace.

        • Roll-up Workplace, the mobile, roll-up workplace for glass artists and hobbyists includes rubber mat, guide rail, strip and circle cutter, turret with 1 carbide cutting wheel and detailed instruction manual.

Pulse protege
2200130
!

 

        • Pulse protege, 145 mm wide.

        • Pulse protege, 145 mm wide, leathers, perforates, with shutter, edges in leathers bordered.

Gloves
2200101
!

 

        • Gloves latex coats.

        • Gloves Latex coats, gripping and firm, with rope-tulip.

Hand-rubber
2200110
!

 

        • Hand-rubber 130 x 170 mm.

        • Hand-rubber 130 x 170 mm, with thumb-hole.